{"title":"Desktop office supplies","description":"","products":[{"product_id":"heavy-duty-guillotine-paper-cutter-12-commercial-steel-a3-a4-trimmer","title":"HFS 12'' A4 Heavy Duty Guillotine Paper Cutter","description":"\u003ch1 style=\"text-align: center;\"\u003e\u003cspan style=\"color: #000000;\"\u003e\u003cstrong\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0564\/5018\/7433\/files\/HFS_PAPER_CUTTER_MANUAL-2025-01.pdf?v=1738807649\" style=\"color: #000000;\" title=\"PAPER CUTTER MANUAL\"\u003eDOWNLOAD MANUAL HERE\u003c\/a\u003e\u003c\/strong\u003e\u003c\/span\u003e\u003c\/h1\u003e\n\n\u003cp\u003eThe HFS 12\" Guillotine Paper Cutter is a commercial grade trimmer capable of cutting up to 400 sheets in a single pass. Save time. energy. and money when making many of the same cuts with this high quality cutter. Easily create half page flyers and save money on paper.\u003cbr\u003e\n\u003cbr\u003e\nWith an adjustable paper clamp. you are sure to get precise cuts every time as the razor harp blade cuts through up to a inch and a half of stacked paper. The blade is also easily replaceable. just take off a few screws and remove the blade when it needs to be sharpened.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eProduct Description\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cul\u003e\n\t\u003cli\u003eEasy to Operate, Sturdy, Well Balanced Frame with Heavy Duty Construction.\u003c\/li\u003e\n\t\u003cli\u003eProfessionally machined and assembled steel blade rail and sturdy blade assembly.\u003c\/li\u003e\n\t\u003cli\u003eHardened precision steel blade customized at the factory. Blades can either be re-sharpened or replaced if needed.\u003c\/li\u003e\n\t\u003cli\u003eMachined steel side gauge with standard measures (1\/32\" resolution), protected with scratch resistant coating.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cul\u003e\n\t\u003cli\u003eHeavy Duty Steel Base\u003c\/li\u003e\n\t\u003cli\u003eHardened Steel Cutting Blade\u003c\/li\u003e\n\t\u003cli\u003eAdjustable Paper Clamp\u003c\/li\u003e\n\t\u003cli\u003ePre-assembled and ready-to-use out of the box\u003c\/li\u003e\n\t\u003cli\u003eScratch resistant coating on grid surface\u003c\/li\u003e\n\t\u003cli\u003eClamp wheel for better holding thicker paper\u003c\/li\u003e\n\t\u003cli\u003eRuler in inches and clear embossed grid for precise cutting\u003c\/li\u003e\n\t\u003cli\u003eCutting handle bar and adjustable backstop for better handling\u003c\/li\u003e\n\t\u003cli\u003eNon-skid rubber feet for table use\u003c\/li\u003e\n\t\u003cli\u003eCE Certified\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cul\u003e\n\t\u003cli\u003eBase Size: 21\" x 15\" x 1 1\/2\"\u003c\/li\u003e\n\t\u003cli\u003eOverall Size: 21\" x 15\" x 13 1\/2\" (including cutting bar)\u003c\/li\u003e\n\t\u003cli\u003eMaximum Cutting Width: 12\"\u003c\/li\u003e\n\t\u003cli\u003eBest Cutting Size: Under Letter Size Paper\u003c\/li\u003e\n\t\u003cli\u003eMaximum Cutting Capacity: 400 Sheets (for 2.85oz Letter Paper)\u003c\/li\u003e\n\t\u003cli\u003ePackage size: 25\" x 17.7\" x 11.8\"\u003c\/li\u003e\n\t\u003cli\u003ePackage Weight: 40 lbs\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003e\u003cstrong\u003eWhats Included:\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cul\u003e\n\t\u003cli\u003e1 - Desktop 400 Sheets Paper Cutter\u003c\/li\u003e\n\t\u003cli\u003e1 - Blade Splint (Tool Box Cover)\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003e\u003cstrong\u003e[NOTE]: Blade is a consumable wear part and is not covered as a lifetime or routine free replacement item.Blade is a consumable wear part and is not covered as a lifetime or routine free replacement item.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003e\u003ca href=\"http:\/\/hardwarefactorystore.freshdesk.com\/support\/solutions\/articles\/44001650167-paper-cutter-support\" target=\"_blank\"\u003e\u003cspan style=\"color: #172089;\"\u003ePaper Cutter Support and Tips\u003c\/span\u003e\u003c\/a\u003e\u003c\/p\u003e\n\n\u003cp\u003e \u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eReplacements\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThe replacements are for Newest Version of HFS 12\" Paper Cutter SKU 16150\u003c\/p\u003e\n\n\u003cp\u003eBe Sure to Compare Measurements to Your Current Paper Cutter!\u003c\/p\u003e\n\n\u003cp\u003eNot guaranteed to work with other brands of stack cutters\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eWARNING: Item is extremely sharp, use extreme caution when opening package and replacing your blade and other parts.\u003c\/strong\u003e \u003c\/p\u003e\n\n\u003cp\u003e \u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eSafety Guidelines\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003col\u003e\n\t\u003cli\u003eOperator should read the entire manual before attempting to use the cutter.\u003c\/li\u003e\n\t\u003cli\u003eNever place hands below the blade, always use the included blade holder when changing the blade.\u003c\/li\u003e\n\t\u003cli\u003eDo not attempt to cut any material other than paper.\u003c\/li\u003e\n\t\u003cli\u003eKeep away from children. Store cutter with blade down, clamp down, and handle removed.\u003c\/li\u003e\n\u003c\/ol\u003e\n\n\u003cp\u003e\u003cstrong\u003eInitial Assembly\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003col\u003e\n\t\u003cli\u003eRemove the cutter from box and place on a flat surface.\u003c\/li\u003e\n\t\u003cli\u003eYou may need to reverse the clamp using the included allen wrench. See photo to the right.\u003c\/li\u003e\n\t\u003cli\u003eAttach the cutting handle by sliding it over the rod. The handle doesn’t attach in any way keeping it easy to remove.\u003c\/li\u003e\n\t\u003cli\u003eRotate the clamp handle clockwise to tighten the paper. It needs to be clamped very tightly to keep the paper from shifting while being cut.\u003c\/li\u003e\n\t\u003cli\u003ePush the safety button while lowering the blade handle.\u003c\/li\u003e\n\t\u003cli\u003eFirmly press the blade handle all the way down until the blade strikes the red cutting stick.\u003c\/li\u003e\n\t\u003cli\u003eRaise the blade and clamp to remove your cut paper.\u003c\/li\u003e\n\u003c\/ol\u003e\n\n\u003cp\u003e\u003cstrong\u003eOperation \u003c\/strong\u003e\u003c\/p\u003e\n\n\u003col\u003e\n\t\u003cli\u003eRotate the clamp handle counter clockwise to lift the clamp\u003c\/li\u003e\n\t\u003cli\u003eLift the blade handle to raise the blade to max height, the rear safety button should engage.\u003c\/li\u003e\n\t\u003cli\u003eMove the fence to your desired cutting length, and insert paper square against side and back fences.\u003c\/li\u003e\n\t\u003cli\u003eRotate the clamp handle clockwise to tighten the paper. It needs to be clamped very tightly to keep the paper from shifting while being cut.\u003c\/li\u003e\n\t\u003cli\u003ePush the safety button while lowering the blade handle 6. Firmly press the blade handle all the way down until the blade strikes the red cutting stick.\u003c\/li\u003e\n\t\u003cli\u003eRaise the blade and clamp to remove your cut paper.\u003c\/li\u003e\n\u003c\/ol\u003e\n\n\u003cp\u003e\u003ciframe height=\"315\" src=\"https:\/\/www.youtube.com\/embed\/PQjcaMyKJ1o?si=CsdCznEgkcoy__5W\" title=\"YouTube video player\" width=\"560\"\u003e\u003c\/iframe\u003e\u003c\/p\u003e\n\n\u003cp\u003e \u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eTroubleshooting\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eMaintenance \u003c\/strong\u003eAll moving parts with screws should be checked periodically to be sure the screws are tight. They may become loose in the process of transportation. Users should also check and tighten the screws after more than 200 cutting cycles. All moving parts should be lubricated periodically to maintain performance and equipment life.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eReplacing The Feet \u003c\/strong\u003eThe cutter has 4 molded plastic feet, one at each corner. These feet keep the cutter from slipping and keep it level. These feet can be broken during shipping, or if the cutter is dropped. We have included one extra foot just in case of shipping damage, but we are happy to send more. Please contact us within 5 business days of receiving your cutter to let us know you need replacement feet. If feet are later damaged by accident, we do have them available for purchase as well. The feet can be attached by a screw or by an adhesive film, simple pull the broken foot off and attach the new one in its place.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eReplace Cutting Stick\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThe cutting stick is the red surface that the blade contacts during the cutting process. Eventually the blade will cause a deep groove in the cutting stick which will cause issues with cutting the last few sheets of paper, what that happens it needs to be rotated or replaced. Each side of the stick can be used twice by flipping the stick length-wise, then you can rotate to a fresh side of the stick for 8 usable areas total.\u003cbr\u003e\n\u003cbr\u003e\n1. Turn the cutter upside down\u003cbr\u003e\n2. Locate two screws that go horizontally into the cutting stick\u003cbr\u003e\n3. Loosen the screws, then push the stick out through the top of the cutter\u003cbr\u003e\n4. Replace the stick with a fresh side under the blade\u003cbr\u003e\n5. Tighten the screws back in (not too hard, you don't want to make indentations in the stick\u003c\/p\u003e\n\n\u003cp\u003e\u003ciframe height=\"315\" src=\"https:\/\/www.youtube.com\/embed\/N3nInezm7xU?si=XDIrmb1aK2bfEpXw\" title=\"YouTube video player\" width=\"560\"\u003e\u003c\/iframe\u003e\u003c\/p\u003e\n\n\u003cp\u003e \u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eAdjust the height of the blade\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp dir=\"ltr\"\u003eNote: If you encounter a situation where the paper cannot be cut: first lower the empty knife and observe where the front blade (knife edge) meets the red pad. The gap between the rear edge of the blade and the red pad is 2mm (low front and high back) for the best cutting Cut state. If it is too flat or the height difference between the front and rear ends is too large, please refer to the following methods to make adjustments.\u003c\/p\u003e\n\n\u003cp dir=\"ltr\"\u003eRemove the hood screws (two on the top of the knife holder and two on the bottom of the chassis) and then open the cover (remove the cover according to the steps in the figure below).\u003c\/p\u003e\n\n\u003cp\u003e\u003cimg alt=\"\" height=\"148\" src=\"https:\/\/cdn.shopifycdn.net\/s\/files\/1\/0564\/5018\/7433\/files\/3_1958d06f-c594-40c5-ae78-506281092b05_480x480.jpg?v=1638235398\" width=\"196\"\u003e\u003cimg alt=\"\" height=\"146\" src=\"https:\/\/cdn.shopifycdn.net\/s\/files\/1\/0564\/5018\/7433\/files\/4_480x480.jpg?v=1638235578\" width=\"195\"\u003e\u003cimg alt=\"\" height=\"147\" src=\"https:\/\/cdn.shopifycdn.net\/s\/files\/1\/0564\/5018\/7433\/files\/5_480x480.jpg?v=1638235623\" width=\"196\"\u003e\u003c\/p\u003e\n\n\u003cp\u003e\u003cspan\u003eThe first case: if the rear end cannot be cut off (close to the shake handle position)\u003c\/span\u003e\u003c\/p\u003e\n\n\u003cp\u003e\u003cspan\u003eLoosen the nut 360 degrees in the direction shown in the figure.\u003c\/span\u003e\u003c\/p\u003e\n\n\u003cp\u003e\u003cspan\u003eAdjust the uppermost nut in the direction of ② as shown in the figure.\u003c\/span\u003e\u003c\/p\u003e\n\n\u003cp\u003e\u003cspan\u003eThen put a piece of paper for trial cutting. When the paper cutting handle is pressed down, the adjustment block will automatically lift up until the blade can completely cut the paper (it can also be adjusted to a height of 1-2MM between the front and rear).\u003c\/span\u003e\u003c\/p\u003e\n\n\u003cp\u003e\u003cspan\u003eAfter adjustment, tighten the nut ① in the opposite direction.\u003c\/span\u003e\u003cimg alt=\"\" src=\"https:\/\/cdn.shopifycdn.net\/s\/files\/1\/0564\/5018\/7433\/files\/1_31f66f70-9d38-479f-88f3-1541f515e04d_480x480.png?v=1638235882\"\u003e\u003c\/p\u003e\n\n\u003cp\u003eThe second case: If the front end cannot be cut (close to the knife leg position)\u003c\/p\u003e\n\n\u003cp\u003eLoosen the nut 360 degrees in the direction shown in the figure.\u003c\/p\u003e\n\n\u003cp\u003eAdjust the screw according to the figure ②.\u003c\/p\u003e\n\n\u003cp\u003eThen put a piece of paper for trial cutting until the leading edge of the paper can be cut. After adjustment, tighten the nut ① in the opposite direction.\u003cimg alt=\"\" src=\"https:\/\/cdn.shopifycdn.net\/s\/files\/1\/0564\/5018\/7433\/files\/2_480x480.png?v=1638236885\"\u003e\u003c\/p\u003e\n\n\u003cp\u003e\u003ciframe height=\"315\" src=\"https:\/\/www.youtube.com\/embed\/ylsFqTGWh7o?si=Ahae_AkGMa9T4SAd\" title=\"YouTube video player\" width=\"560\"\u003e\u003c\/iframe\u003e\u003c\/p\u003e\n\n\u003cp\u003e \u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eBlade Leveling Instructions\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eWhen the blade is fully down it should be slightly lower in the \"back\" of the cutter (near the hinge). If it isn't, there is a way to adjust is. First try turning the cutting stick to a fresh side. It can be rotated 8 ways before it needs to be replaced. On the bottom (underneath) of the cutter there are 2 bolts that go horizontally into the side of the cutting stick. Loosen those and push the stick out through the top of the cutter. Turn to a fresh side and put it back into place.\u003cbr\u003e\n\u003cbr\u003e\nIf that doesn't help:\u003cbr\u003e\n\u003cbr\u003e\nPlease refer to the videos on our website or contact customer service for instructions on how to remove the side access panel. Once it's off, follow these steps:\u003cbr\u003e\n\u003cbr\u003e\nLook at the back end of the cutter (where the hinge is) and you will see a silver metal plate with three bolts aligned vertically. Loosen the top and bottom bolt only, also note at the top of the silver plate there is a small set screw. Adjust the entire silver plate (which will move the entire hinge) up and down to adjust the angle of the blade on the red cutting stick. It should contact the back of the cutting stick first, and still be -1\/16-1\/8\" or so away from touching in the front.\u003c\/p\u003e\n\n\u003cp\u003eThe assembly may be hard to move at first, since it's been bolted in place from the factory. Often you can use a screwdriver or pry bar to get it to start moving. Loosening the middle bolt on the silver plate may help as well, though it usually isn't necessary. \u003c\/p\u003e\n\n\u003cp\u003e\u003ciframe height=\"315\" src=\"https:\/\/www.youtube.com\/embed\/XIsDRljmzeA\" title=\"YouTube video player\" width=\"560\"\u003e\u003c\/iframe\u003e\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eReplacing The Blade \u003c\/strong\u003eThe cutting blade is made of heat-treated high-carbon steel and is designed for repeated use. However, over time the blade will become dull, and not perform to the highest standards. Cutting heavy paper or cardboard will dull the blade more quickly than thinner paper stock. A dull blade will not cut accurately. To remove the blade, place the blade holder under the blade and lower the blade until it rests on the holder. Remove the screw holding the blade in place, then raise the blade mechanism which will leave the blade sitting in the holder. The blade can be sharpened by a professional sharpening service for knives, lawn mowers, swords, and more. The blade can also be replaced with a new blade.\u003c\/p\u003e\n\n\u003cp\u003e\u003ciframe height=\"315\" src=\"https:\/\/www.youtube.com\/embed\/T9DxIkkWxW0\" title=\"YouTube video player\" width=\"560\"\u003e\u003c\/iframe\u003e\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eSupport \/ Warranty \/ Shipping Damage \/ Replacement Parts \u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eIf your cutter arrived damaged, or you have a warranty claim, HFS will take care of all issues. We also have videos available and updated information on design changes and commons questions about the cutter. \u003c\/p\u003e\n\n\u003cp\u003eThe limited-warranty period on our cutters is 1-Year from Date of Purchase. The warranty does not cover blades, feet, knobs, cutting sticks, safety pins, or customer negligence. Shipping damage claims must be submitted within one week of received the product. Returns are accepted within 30 days of date of purchase, no exceptions.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eContact Us\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eIf the above website doesn’t help you may contact us at the following email:\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003einfo@hfsus.com\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003e \u003c\/p\u003e\n","brand":"HFS","offers":[{"title":"12\" A4 Paper Cutter","offer_id":41035868209321,"sku":"16150-AMZ2-NS","price":171.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0564\/5018\/7433\/files\/16150-AMZ2_8.jpg?v=1752558522"},{"product_id":"17-heavy-duty-guillotine-paper-cutter","title":"HFS 17\" Heavy Duty Guillotine Paper Cutter","description":"\u003ch1 style=\"text-align: center;\"\u003e\u003cspan style=\"color: #000000;\"\u003e\u003cstrong\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0564\/5018\/7433\/files\/HFS_PAPER_CUTTER_MANUAL-2025-01.pdf?v=1738807649\" style=\"color: #000000;\" title=\"PAPER CUTTER MANUAL\"\u003eDOWNLOAD MANUAL HERE\u003c\/a\u003e\u003c\/strong\u003e\u003c\/span\u003e\u003c\/h1\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eThe HFS 17\" Guillotine Paper Cutter is a commercial grade trimmer capable of cutting up to 400 sheets in a single pass. Save time, energy, and money when making many of the same cuts with this high quality cutter. Easily create half page flyers and save money on paper.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003eWith an adjustable paper clamp, you are sure to get precise cuts every time as the razor harp blade cuts through up to a inch and a half of stacked paper. The blade is also easily replaceable, just take off a few screws and remove the blade when it needs to be sharpened.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eHeavy Duty Steel Base\u003c\/li\u003e\n\u003cli\u003eHardened Steel Cutting Blade\u003c\/li\u003e\n\u003cli\u003eAdjustable Paper Clamp\u003c\/li\u003e\n\u003cli\u003ePre-assembled and ready-to-use out of the box\u003c\/li\u003e\n\u003cli\u003eScratch resistant coating on grid surface\u003c\/li\u003e\n\u003cli\u003eClamp wheel for better holding thicker paper\u003c\/li\u003e\n\u003cli\u003eRuler in inches and clear embossed grid for precise cutting\u003c\/li\u003e\n\u003cli\u003eCutting handle bar and adjustable backstop for better handling\u003c\/li\u003e\n\u003cli\u003eNon-skid rubber feet for table use\u003c\/li\u003e\n\u003cli\u003eCE Certified\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eBase Size: 25.5\" x 19.25\" x 2\"\u003c\/li\u003e\n\u003cli\u003eOverall Size: 25.5\" x 19.25\" x 12.75\" (including cutting bar)\u003c\/li\u003e\n\u003cli\u003eMaximum Cutting Width: 17\"\u003c\/li\u003e\n\u003cli\u003eBest Cutting Size: Under Ledger Size Paper\u003c\/li\u003e\n\u003cli\u003eMaximum Cutting Capacity: 400 Sheets (for 2.85oz Ledger Paper)\u003c\/li\u003e\n\u003cli\u003ePackage size: 30\" x 22.5\" x 15\"\u003c\/li\u003e\n\u003cli\u003ePackage Weight: 58 lbs\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eWhats Included:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e1 - Desktop 400 Sheets Paper Cutter\u003c\/li\u003e\n\u003cli\u003e1 - Blade Splint\u003c\/li\u003e\n\u003cli\u003e1 - User's Manual\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003e[NOTE]: Blade is a consumable wear part and is not covered as a lifetime or routine free replacement item.Blade is a consumable wear part and is not covered as a lifetime or routine free replacement item.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eReplacements\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe replacements are for Newest Version of HFS 17\" Paper Cutter SKU 16167\u003c\/p\u003e\n\u003cp\u003eBe Sure to Compare Measurements to Your Current Paper Cutter!\u003c\/p\u003e\n\u003cp\u003eNot guaranteed to work with other brands of stack cutters\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWARNING: Item is extremely sharp, use extreme caution when opening package and replacing your blade and other parts.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSafety Guidelines\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eOperator should read the entire manual before attempting to use the cutter.\u003c\/p\u003e\n\u003cp\u003eNever place hands below the blade, always use the included blade holder when changing the blade.\u003c\/p\u003e\n\u003cp\u003eDo not attempt to cut any material other than paper.\u003c\/p\u003e\n\u003cp\u003eKeep away from children. Store cutter with blade down, clamp down, and handle removed.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eInitial Assembly\u003c\/strong\u003e\u003c\/p\u003e\n\u003col\u003e\n\u003cli\u003eRemove the cutter from box and place on a flat surface.\u003c\/li\u003e\n\u003cli\u003eYou may need to reverse the clamp using the included allen wrench. See photo to the right.\u003c\/li\u003e\n\u003cli\u003eAttach the cutting handle by sliding it over the rod. The handle doesn’t attach in any way keeping it easy to remove.\u003c\/li\u003e\n\u003cli\u003eRotate the clamp handle clockwise to tighten the paper. It needs to be clamped very tightly to keep the paper from shifting while being cut.\u003c\/li\u003e\n\u003cli\u003ePush the safety button while lowering the blade handle.\u003c\/li\u003e\n\u003cli\u003eFirmly press the blade handle all the way down until the blade strikes the red cutting stick.\u003c\/li\u003e\n\u003cli\u003eRaise the blade and clamp to remove your cut paper.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cp\u003e\u003cstrong\u003eOperation \u003c\/strong\u003e\u003c\/p\u003e\n\u003col\u003e\n\u003cli\u003eRotate the clamp handle counter clockwise to lift the clamp.\u003c\/li\u003e\n\u003cli\u003eLift the blade handle to raise the blade to max height, the rear safety button should engage.\u003c\/li\u003e\n\u003cli\u003eMove the fence to your desired cutting length, and insert paper square against side and back fences.\u003c\/li\u003e\n\u003cli\u003eRotate the clamp handle clockwise to tighten the paper. It needs to be clamped very tightly to keep the paper from shifting while being cut.\u003c\/li\u003e\n\u003cli\u003ePush the safety button while lowering the blade handle.\u003c\/li\u003e\n\u003cli\u003eFirmly press the blade handle all the way down until the blade strikes the red cutting stick.\u003c\/li\u003e\n\u003cli\u003eRaise the blade and clamp to remove your cut paper. \u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cp\u003e\u003ciframe height=\"315\" src=\"https:\/\/www.youtube.com\/embed\/PQjcaMyKJ1o?si=cetabgMwKD-swXIa\" title=\"YouTube video player\" width=\"560\"\u003e\u003c\/iframe\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eTroubleshooting\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMaintenance \u003c\/strong\u003eAll moving parts with screws should be checked periodically to be sure the screws are tight. They may become loose in the process of transportation. Users should also check and tighten the screws after more than 200 cutting cycles. All moving parts should be lubricated periodically to maintain performance and equipment life.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eReplacing The Feet \u003c\/strong\u003eThe cutter has 4 molded plastic feet, one at each corner. These feet keep the cutter from slipping and keep it level. These feet can be broken during shipping, or if the cutter is dropped. We have included one extra foot just in case of shipping damage, but we are happy to send more. Please contact us within 5 business days of receiving your cutter to let us know you need replacement feet. If feet are later damaged by accident, we do have them available for purchase as well. The feet can be attached by a screw or by an adhesive film, simple pull the broken foot off and attach the new one in its place.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eReplace Cutting Stick\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe cutting stick is the red surface that the blade contacts during the cutting process. Eventually the blade will cause a deep groove in the cutting stick which will cause issues with cutting the last few sheets of paper, what that happens it needs to be rotated or replaced. Each side of the stick can be used twice by flipping the stick length-wise, then you can rotate to a fresh side of the stick for 8 usable areas total.\u003cbr\u003e\u003cbr\u003e1. Turn the cutter upside down\u003cbr\u003e2. Locate two screws that go horizontally into the cutting stick\u003cbr\u003e3. Loosen the screws, then push the stick out through the top of the cutter\u003cbr\u003e4. Replace the stick with a fresh side under the blade\u003cbr\u003e5. Tighten the screws back in (not too hard, you don't want to make indentations in the stick\u003c\/p\u003e\n\u003cp\u003e\u003ciframe height=\"315\" src=\"https:\/\/www.youtube.com\/embed\/N3nInezm7xU?si=c0ZV9OmZiph7-VQL\" title=\"YouTube video player\" width=\"560\"\u003e\u003c\/iframe\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAdjust the height of the blade\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003eNote: If you encounter a situation where the paper cannot be cut: first lower the empty knife and observe where the front blade (knife edge) meets the red pad. The gap between the rear edge of the blade and the red pad is 2mm (low front and high back) for the best cutting Cut state. If it is too flat or the height difference between the front and rear ends is too large, please refer to the following methods to make adjustments.\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003eRemove the hood screws (two on the top of the knife holder and two on the bottom of the chassis) and then open the cover (remove the cover according to the steps in the figure below).\u003c\/p\u003e\n\u003cp\u003e\u003cimg alt=\"\" height=\"148\" src=\"https:\/\/cdn.shopifycdn.net\/s\/files\/1\/0564\/5018\/7433\/files\/3_1958d06f-c594-40c5-ae78-506281092b05_480x480.jpg?v=1638235398\" width=\"196\"\u003e\u003cimg alt=\"\" height=\"146\" src=\"https:\/\/cdn.shopifycdn.net\/s\/files\/1\/0564\/5018\/7433\/files\/4_480x480.jpg?v=1638235578\" width=\"195\"\u003e\u003cimg alt=\"\" height=\"147\" src=\"https:\/\/cdn.shopifycdn.net\/s\/files\/1\/0564\/5018\/7433\/files\/5_480x480.jpg?v=1638235623\" width=\"196\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eThe first case: if the rear end cannot be cut off (close to the shake handle position)\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eLoosen the nut 360 degrees in the direction shown in the figure.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eAdjust the uppermost nut in the direction of ② as shown in the figure.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eThen put a piece of paper for trial cutting. When the paper cutting handle is pressed down, the adjustment block will automatically lift up until the blade can completely cut the paper (it can also be adjusted to a height of 1-2MM between the front and rear).\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eAfter adjustment, tighten the nut ① in the opposite direction.\u003c\/span\u003e\u003cimg alt=\"\" src=\"https:\/\/cdn.shopifycdn.net\/s\/files\/1\/0564\/5018\/7433\/files\/1_31f66f70-9d38-479f-88f3-1541f515e04d_480x480.png?v=1638235882\"\u003e\u003c\/p\u003e\n\u003cp\u003eThe second case: If the front end cannot be cut (close to the knife leg position)\u003c\/p\u003e\n\u003cp\u003eLoosen the nut 360 degrees in the direction shown in the figure.\u003c\/p\u003e\n\u003cp\u003eAdjust the screw according to the figure ②.\u003c\/p\u003e\n\u003cp\u003eThen put a piece of paper for trial cutting until the leading edge of the paper can be cut. After adjustment, tighten the nut ① in the opposite direction.\u003cimg alt=\"\" src=\"https:\/\/cdn.shopifycdn.net\/s\/files\/1\/0564\/5018\/7433\/files\/2_480x480.png?v=1638236885\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ciframe height=\"315\" src=\"https:\/\/www.youtube.com\/embed\/ylsFqTGWh7o?si=-wDvDU3SFSAiKaOr\" title=\"YouTube video player\" width=\"560\"\u003e\u003c\/iframe\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eBlade Leveling Instructions\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eWhen the blade is fully down it should be slightly lower in the \"back\" of the cutter (near the hinge). If it isn't, there is a way to adjust is. First try turning the cutting stick to a fresh side. It can be rotated 8 ways before it needs to be replaced. On the bottom (underneath) of the cutter there are 2 bolts that go horizontally into the side of the cutting stick. Loosen those and push the stick out through the top of the cutter. Turn to a fresh side and put it back into place.\u003cbr\u003e\u003cbr\u003eIf that doesn't help:\u003cbr\u003e\u003cbr\u003ePlease refer to the videos on our website or contact customer service for instructions on how to remove the side access panel. Once it's off, follow these steps:\u003cbr\u003e\u003cbr\u003eLook at the back end of the cutter (where the hinge is) and you will see a silver metal plate with three bolts aligned vertically. Loosen the top and bottom bolt only, also note at the top of the silver plate there is a small set screw. Adjust the entire silver plate (which will move the entire hinge) up and down to adjust the angle of the blade on the red cutting stick. It should contact the back of the cutting stick first, and still be -1\/16-1\/8\" or so away from touching in the front.\u003c\/p\u003e\n\u003cp\u003eThe assembly may be hard to move at first, since it's been bolted in place from the factory. Often you can use a screwdriver or pry bar to get it to start moving. Loosening the middle bolt on the silver plate may help as well, though it usually isn't necessary.\u003ciframe height=\"315\" src=\"https:\/\/www.youtube.com\/embed\/XIsDRljmzeA\" title=\"YouTube video player\" width=\"560\"\u003e\u003c\/iframe\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eReplacing The Blade \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe cutting blade is made of heat-treated high-carbon steel and is designed for repeated use. However, over time the blade will become dull, and not perform to the highest standards. Cutting heavy paper or cardboard will dull the blade more quickly than thinner paper stock. A dull blade will not cut accurately. To remove the blade, place the blade holder under the blade and lower the blade until it rests on the holder. Remove the screw holding the blade in place, then raise the blade mechanism which will leave the blade sitting in the holder. The blade can be sharpened by a professional sharpening service for knives, lawn mowers, swords, and more. The blade can also be replaced with a new blade.\u003ciframe height=\"315\" src=\"https:\/\/www.youtube.com\/embed\/T9DxIkkWxW0\" title=\"YouTube video player\" width=\"560\"\u003e\u003c\/iframe\u003e \u003cstrong\u003eSupport \/ Warranty \/ Shipping Damage \/ Replacement Parts\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eIf your cutter arrived damaged, or you have a warranty claim, HFS will take care of all issues. We also have videos available and updated information on design changes and commons questions about the cutter.\u003c\/p\u003e\n\u003cp\u003eThe limited-warranty period on our cutters is 1-Year from Date of Purchase. The warranty does not cover blades, feet, knobs, cutting sticks, safety pins, or customer negligence. Shipping damage claims must be submitted within one week of received the product. Returns are accepted within 30 days of date of purchase, no exceptions.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eContact Us\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eIf the above website doesn’t help you may contact us at the following email:\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003einfo@hfsus.com\u003c\/strong\u003e\u003c\/p\u003e","brand":"HFS","offers":[{"title":"17\" A3 Paper Cutter","offer_id":41036846170281,"sku":"16167","price":265.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0564\/5018\/7433\/files\/16167.jpg?v=1752558447"},{"product_id":"sneeze-guard-with-transaction-window-30-x-24-freestanding-shield","title":"Sneeze Guard with Transaction Window, 30in x 24in Protective Freestanding Shield for Offices and Stores","description":"\u003cp\u003e\u003cstrong\u003e[Portable Plexiglass Sneeze Guard]:\u003c\/strong\u003e Clear counter shield sneeze guard protects yourself and your employees from airborne contaminants. Shields and reduces exposure to sneezing, coughing, and droplets. Allow the user to easily flat pack and move the clear plastic shield to wherever it is needed. Quick and easy protection from coughing and sneezing.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e[Easy to Assembly]:\u003c\/strong\u003e Features base stands that slide into matching slots, making assembly a breeze. Have your shield deployed in less than a minute!\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e[Note]:\u003c\/strong\u003e This glass is crystal clear and will arrive with a film on either side of the plexiglass to protect it from cuts and scraps. Please DO NOT use generic cleaning products, it will damage the material.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e[Impact resistant]:\u003c\/strong\u003e Made of 1\/6” thick acrylic, this shield is highly impact and shatter-resistant.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e[For any situation]:\u003c\/strong\u003e This product will fit most countertops and tabletops—perfect for service and sales environments. Used in Nail, Hair Salons, Schools, Day Spas, Hotel Lobbies, Grocery Store Checkout Areas, Reception Areas, Desk Areas, and Countertops.\u003c\/p\u003e","brand":"HFS","offers":[{"title":"Default Title","offer_id":40462462156969,"sku":"SGD-30X24IN","price":56.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0564\/5018\/7433\/products\/SGD-30X24IN.jpg?v=1752558013"}],"url":"https:\/\/www.hardwarefactorystore.com\/collections\/desktop-office-supplies.oembed","provider":"Hardware Factory Store","version":"1.0","type":"link"}