Master Vapor Pumps MVP150 Vapor Recovery Pump is designed for hydrocarbon extraction processing with the ability to recover vapor with operating pressures up to 150 PSI. This pump is also FDA food grade compliant with C1D1 and 3rd party certification it is able to maintain a continuous 100% duty cycle running 24/7 which increases processing potential.
KEY FEATURES: Recover Vapor up to 150PSI FDA Food Grade Compliant C1D1 and 3rd Party Certified Continouos 100% Duty Cycle - Run 24/7 Designed Especially for Hydrocarbon Vapor Recovery The Most User Friendly Diaphragm Pump / DTF :) Made in the USA
Recover LP-Gas vapor at over 6CFM (cubic feet per minute) Recover butane at up to 1 LB/Min (pounds per minute) Recover and recondense butane at over 12 GPH (gallons per hour) Maximum pumping outlet pressure: 150PSI Maximum pumping inlet vacuum produced: 27 InHg (0.91 bar) Maximum pumping speed: 190 CPM (cycles per minute) Pump static withstand pressure rating: MAWP 350 PSI (24 bar) Materials: pressure section: stainless steel; diaphragms: FKM; reed valves: stainless steel Optional PTFE diaphragms kit available Process gas temperature range: FKM -40-275F (-40-135C); PTFE +40-220F (4-104C) Recommended FKM replacement schedule: every 1000 hours running time Air temperature range for motor/gearbox operation: 32-104F(0-40C)
Pump Head Charge:
Motor is coupled to diaphragms with patented gas pressure charged chamber Pumping outlet pressure runs about 10 PSI lower than the charge gas pressure level Non-reactive CO2 gas is used to charge the pump head CO2 gas is safer than air for driving the pump CO2 gas is non-flammable and non-explosive with LPG (should a diaphragm ever leak) CO2 gas regulator with gauges is provided with pump assembly CO2 tank is operator provided (cannot ship filled tanks) - from any welding supply store Pump charge gas supply: standard (#20) 5 LB tank of industrail CO2 Typical CO2 gas usage: <0.2 SCFH (very little); estimated life of charge gas tank: 1 year Pump charge gas pressure range: continuous 5 to 70 PSI (1.4 to 5.5 bar); to 80 PSI intermittent
Electrical and Mechanical:
Electric motor: explosion proof for C1D1 hazardous areas; rated Class I Gr C & D, Class II Gr F&G Electric motor: 1 HP, 1800 RPM, 60 Hz Motor option: Model MVP-6CFM-1PH: Single-phase: 115/208-230V, 13.4/6.7 FLA (full load amps) Motor option: Model MVP-6CFM-3PH: Three-phase: 208-230/460V, 3.3/1.65 FLA, Inverter-rated Pump Speed: 190 CPM (cycles per minute) at 60 Hz Noise: sound pressure measured 1 meter from pump: 80.5 dBa Porting: process inlet and outlet: 1/2" JIC-male Added ports for optional pressure gauges: inlet and outlet: 1/4" FNPT Inlet & outlet ports at ideal equipment connections heights 46" and 41" above floor Size: 17.0" x 19.9" x 46" tall; minimum use of valuable floor space Weight: 182.5 lb (82.8 kg)
6 Month Factory Warranty Only. 6 Month Protection Plan $1200 12 Month Protection Plan $1800 24 Month Protection Plan $2400