TEXALAN(R) 250Pc Pin Gage Set M2(-),0.251-0.500"Heat Treated Bearing Steel - Minus tolerance +0.0000/-0.0002 in; 0.001 in increments; 2 in long, 60-62 HRC steel pins with storage case for hole checks

TEXALAN SKU: SGUI-M2-IN
HFS-SYNC:SGUI-M0-IN:01.jpg:44e40f4c46e79cd3dd8ef634e14e8f965b3f866d625ce1703d219d763e90a112
HFS-SYNC:SGUI-M0-IN:02.jpg:54f1177bac56abeb8978c901d8bbf7721f530a6e10e55addfca2d1c6de7ea523
HFS-SYNC:SGUI-M0-IN:03.jpg:4d86c3a04ae1e85e67786c33e0b7714cd4adb282bb1346e1c848688ae2748fad
HFS-SYNC:SGUI-M0-IN:04.jpg:b44cc47d8a1db019fa8eca272990003451408fcf3d3b6812db1b3cb54be84649
HFS-SYNC:SGUI-M0-IN:05.jpg:e5adfa4e527129b44f43a855c0eeeaa0b276d84f060a45c230310a718292c5ca
HFS-SYNC:SGUI-M0-IN:06.jpg:8632013da6a25edea79e410761263d09753c4e4e2eb58ef13e033e85bb5c8268
HFS-SYNC:SGUI-M0-IN:07.jpg:8b71e2a1a279537123e1831544678b9315859f3818d1cfcdd264e3cbc2fbb2bc
HFS-SYNC:SGUI-M2-IN:01.jpg:8fb2f992ec74b855263ccc739dc353869cd776975ceaada7887b219789d281ea
HFS-SYNC:SGUI-M2-IN:02.jpg:190c15bf77af94622e6fa33b3e1c7004b6a371977c446985677f41d24b7199a4
HFS-SYNC:SGUI-M2-IN:03.jpg:b7cb878c53cebaab2256529ffe616b58b5c8f56098fa28e8aa963d98d3dece83
HFS-SYNC:SGUI-M2-IN:04.jpg:1b094938bae8aba4ce727cb0ce818bb9c322b256cb415b7ab7c1c3820437e442
HFS-SYNC:SGUI-M2-IN:05.jpg:dd327bf7cc05174bebe9f4114773130fe608d875a623934afbdd0cabc5271ea7
HFS-SYNC:SGUI-M2-IN:06.jpg:30e8b78d5cc865fa58900dc8b9978bfc0baea007369766807d02b49ed0480dc2
HFS-SYNC:SGUI-M1-IN:01.jpg:7d9c0c14256b314801164b0ffce3282d59474dcb4e746b82b3535db9091e14bc
HFS-SYNC:SGUI-M1-IN:02.jpg:d0f998ce8d0da1f21f7e67b9a459e18e40e4da492fc1c110bbdbdc95c3389259
HFS-SYNC:SGUI-M1-IN:03.jpg:5f7cead2600399a5e2981488a6bee6f056bec667fe0e968d39c407c53aa18d77
HFS-SYNC:SGUI-M1-IN:04.jpg:ef6caaa2e3b298b986a208ef551b8134667c58ed2fd22c42188b489a5fde39fc
HFS-SYNC:SGUI-M1-IN:05.jpg:3ee4a997f663836f0a882db5c6d80ea52bbf01e77a89cf7b71d3b0ca7be9e28d
HFS-SYNC:SGUI-M1-IN:06.jpg:c5f803603b80d1a2b0296e50a85b93a8ea92745eeecc05c604362915bf61be58
HFS-SYNC:SGUI-M1-IN:08.jpg:97e1d7930560c0e2fe9444b49c71febfa9bc2c016c138f1a35fd93a02a8ffe1b
HFS-SYNC:BNT-SGUI-M3-IN-NS:01.jpg:cc48799495ee02f31173b867dc09c98abb94c2a0f2633698f870f86778946e65
HFS-SYNC:BNT-SGUI-M3-IN-NS:02.jpg:2236b97d75e584b8ee522682451ebfd535e2552203a2d22039975e91c08d4670
HFS-SYNC:BNT-SGUI-M3-IN-NS:03.jpg:3f8dc3d1529cf834c4ced07713b680db5455de81f567497aff44dc284d637196
HFS-SYNC:BNT-SGUI-M3-IN-NS:04.jpg:0a37cb55b86a5e65b44eeb50c8073e9d7858b6526238fe208d6363679cc27958
HFS-SYNC:BNT-SGUI-M3-IN-NS:05.jpg:f87a8d3d01e34153d1ae64d23f68f62bcaeab653c58ca5786db94dbe9ff50bac
HFS-SYNC:BNT-SGUI-M3-IN-NS:07.jpg:35c4e77684dce7f04bbf302c34a97936dc538510d4e8cdd07496f3fa26282976
HFS-SYNC:BNT-SGUI-M4-IN-NS:01.jpg:3a2c8bf981d253cd9a6b7e46f02d77a3511316250a9c2ca96963a2a79820c370
HFS-SYNC:BNT-SGUI-M4-IN-NS:02.jpg:47fe2ee43b6e357dc95162b95fcaf82ac62128ce6901c54448e9eaca3f0b0dbb
HFS-SYNC:BNT-SGUI-M4-IN-NS:03.jpg:f0f2abf52966b1811f5f826cdb42d393e12846d042be173b791e58f24cd05d45
HFS-SYNC:BNT-SGUI-M4-IN-NS:04.jpg:ea2e672ed1a7b583aff27f3dd20bda8b2e3404eb29d5bfeab97d230529b5b5f4
HFS-SYNC:BNT-SGUI-M4-IN-NS:05.jpg:59fa367cf858a22c68a298d8005c17e543c95ba978ef25baa54e6ec36bd6d844
HFS-SYNC:BNT-SGUI-M4-IN-NS:06.jpg:92e713f8d00f33f320f4c040efbb22e83757af1cd9aeb6dc47f8cd95bafac0d5
HFS-SYNC:BNT-SGUI-M5-IN-NS:01.jpg:d28a90e3a64a62aaef854aec2a2f9a29979fb49d06de1c095ffd687c600eb554
HFS-SYNC:BNT-SGUI-M5-IN-NS:02.jpg:0b64964f6d0dfca20ceba0b30af4711ce14c53785113d842bf76eff02fbc4af2
HFS-SYNC:BNT-SGUI-M5-IN-NS:03.jpg:fa7413d3321f63defcd6ec16d38b14ce8955bba6a4b13214e53fb2c5089421da
HFS-SYNC:BNT-SGUI-M5-IN-NS:04.jpg:5e596032a14a51ceb055387b1fff554d7afdd59ae9017200254bde482688f08d
HFS-SYNC:BNT-SGUI-M5-IN-NS:05.jpg:84c4fc7c12f1a43d840f344e298a4847686ee07ea08fd535d6eaa6b7355d56bf
HFS-SYNC:BNT-SGUI-M5-IN-NS:07.jpg:1a3df1519bb7c1b1860f8f28937513e28cae6529177a1bb02b0d9d855cbb3546

TEXALAN(R) 250Pc Pin Gage Set M2(-),0.251-0.500"Heat Treated Bearing Steel - Minus tolerance +0.0000/-0.0002 in; 0.001 in increments; 2 in long, 60-62 HRC steel pins with storage case for hole checks

TEXALAN SKU: SGUI-M2-IN
Size Range
Tolerance
Regular price $135.99
/
  • We currently only offer shipping to addresses within the US
  • Sustainably made
  • Secure payments
  • Size & Minus Tolerance: Includes 250 pin gages from 0.251 to 0.500 inch in 0.001 inch increments. Each gage is made to +0.0000/-0.0002 in from nominal size.
  • Clear Laser Markings: Each pin features a clear laser-engraved size marking for quick identification, helping users select the correct gage efficiently during inspection.
  • Hardened Bearing Steel: Heat-treated bearing steel pins are 2 in long and rated HRC 60-62 for repeated dimensional inspection in shop environments.
  • Organized Storage: The fitted plastic case keeps all sizes in clearly marked positions, helping users select the correct pin quickly and keep the set orderly.
  • Versatile Inspection Use: Suitable for checking hole diameters, worn bushings, hole location, spacing between holes, and dimensional conditions in machining work.

The TEXALAN(R) M2 minus pin gage set includes 250 gages covering 0.251 to 0.500 inch in 0.001 inch increments. Each gage is made to a minus tolerance of +0.0000/-0.0002 in from nominal size and features a clear laser-engraved size marking for quick identification during inspection. The heat-treated bearing steel pins are 2 in ±0.01 long and rated HRC 60-62 for repeated use in machining, maintenance, and quality-control environments. A fitted plastic storage case keeps all 250 sizes organized in clearly marked positions for faster selection and reduced handling errors. Use the set to check hole diameters, worn bushings, hole location, spacing between holes, and other dimensional conditions where known-size pins are required. Package includes 250 pin gages and one storage case. Always select the required nominal size and tolerance direction according to your drawing or inspection procedure.

HFS Warranties

HFS warrants that the Product (“Product”), when properly used and installed in conformance with HFS’ specifications for such Product, will be free from defects in materials and workmanship and will substantially conform to HFS specifications for such Product during the Warranty Period.

LIMITED WARRANTY.

  • What is Covered. Except as specifically excluded below, HFS warrants, to direct Customer only, that any product manufactured by HFS and sold to Customer (a) conforms to HFS’ published and/or written specifications and (b) is free from defects in material or workmanship. This warranty expires one (1) year from the date of delivery of the product to Customer.Warranties are non-transferable, only the original purchaser will receive warranty benefits.
  • Please note that chemical products are sold without any warranty, whether expressed or implied. This includes, but is not limited to, warranties of merchantability, fitness for a particular purpose, or non-infringement. Due to the inherent variability in the storage, handling, and usage of chemical substances, we cannot guarantee the product’s performance under specific conditions. It is the responsibility of the buyer to conduct their own tests and evaluations to ensure the product's suitability for their intended applications. The seller assumes no responsibility for any potential risks, damages, or losses resulting from the use of the chemical products.

 

What is Not Covered

Except as otherwise specifically provided in this agreement, HFS and its subsidiaries or affiliates make no further warranties, either expressed or implied, including but not limited to the implied warranties of fitness for a particular purpose, merchantability, title, and non-infringement. The limited warranty does not cover and is voided by any and all illegal uses, misuse, abuse, modifications, damages related to normal wear and tear, improper preparation, installation, or use, improper cleaning and maintenance, failure to follow care instructions, and the like.

 

Additionally, this limited warranty does not cover damage resulting from misuse, accident, negligence, modification or alteration of hardware or software, tampering, unsuitable environments beyond product specifications, improper maintenance, or failure caused by external products not provided by HFS. There is no warranty for uninterrupted or error-free operation or for defects in design. No warranty is provided for loss or damage to valuables, and all equipment must be tested prior to use. Furthermore, there is no warranty for products with removed or altered identification labels.

 

HFS does not provide any other warranties, including the implied warranties of merchantability and fitness for a particular purpose. In some jurisdictions, limitations on implied warranties may not apply. Consumable maintenance items, such as gaskets, seals, cutter blades, pump oil, and cutting sticks, are not covered under this warranty as they are designed to be replaced periodically. HFS is not responsible for returning products not covered by this limited warranty.

 

UNLAWFUL USES

Customer agrees to not use any products sold by HFS for any unlawful or illegal purposes or for use which product was not intended for including any alteration of the product. Customer agrees to indemnify, defend, and hold harmless HFS, its subsidiaries and affiliates, and their respective officers, directors, employees, agents, representatives and shareholders, predecessors and successors, from and against any and all claims, demands, causes of action, damages, losses, liabilities, judgments, taxes, costs, fees and expenses (including, without limitation, reasonable costs and expenses of investigation and settlement and reasonable attorneys’ fees and expenses), to the extent arising out of or relating to any unlawful or illegal use of products sold by HFS. Such indemnification obligations shall survive the expiration or termination of this Agreement for any reason.

 

LIMITATION OF LIABILITIES. TO THE MAXIMUM EXTENT PERMITTED BY LAW, UNDER NO CIRCUMSTANCES WILL HFS OR ITS DIRECTORS, OFFICERS, EMPLOYEES, AGENTS, SUBSIDIARIES OR AFFILIATES BE LIABLE FOR ANY CONSEQUENTIAL, INDIRECT, SPECIAL, PUNITIVE, EXEMPLARY, MULTIPLIED, OR INCIDENTAL DAMAGES OR LOST PROFITS, WHETHER FORESEEABLE OR UNFORESEEABLE, OR PREJUDGMENT INTEREST OR ATTORNEYS’ FEES OR COSTS BASED ON CLAIMS OF CUSTOMER OR ANY OTHER PARTY ARISING OUT OF BREACH OR FAILURE OF EXPRESS OR IMPLIED WARRANTY, BREACH OF CONTRACT, MISREPRESENTATION, NEGLIGENCE, STRICT LIABILITY IN TORT, FAILURE OF ANY REMEDY TO ACHIEVE ITS ESSENTIAL PURPOSE, OR OTHERWISE.

 

PRIVACY AND NON-DISCLOSURE. While still complying with all applicable laws, HFS will endeavor to preserve Customer’s identity from disclosure to third parties.

 

FORCE MAJEURE. HFS shall not be responsible or liable for any failure to perform hereunder if such failure is caused by acts of God, acts of government, strikes or labor disputes, failures of transportation, fire, flood, disease, epidemic or other casualty, failures of subcontractors or suppliers, or any other cause or causes that are beyond HFS’ reasonable control.

 

GOVERNING LAW AND VENUE. This Agreement shall be governed by the procedural and substantive laws of the State of California.  Any litigation arising under or pursuant to this agreement shall be conducted in Los Angeles County.

 

DISPUTE RESOLUTION. Any dispute arising between Customer and HFS arising out of or in connection with this Agreement or the interpretation, breach, or enforcement thereof, including the determination of the scope or applicability of this agreement to arbitrate (collectively referred to as a “Dispute”) shall be resolved as follows: (1) the parties shall first attempt to resolve any Dispute through informal, good-faith negotiations and/or mediation; (2) If the Dispute is not informally resolved within thirty (30) calendar days of written notice of the Dispute by either party to the other, then the DISPUTE SHALL BE FINALLY SETTLED BY BINDING ARBITRATION administered pursuant to JAMS’ Comprehensive Arbitration Rules and Procedures and in accordance with the Expedited Procedures in those Rules (or, if mutually agreed to by the parties, pursuant to JAMS’ Streamlined Arbitration Rules and Procedures). The arbitrator shall not have any power to alter, amend, modify or change any of the terms of this Agreement nor to grant any remedy which is either prohibited by the terms of this Agreement, or not available in a court of law. The arbitrator is not empowered to award punitive or exemplary damages, except where permitted by statute, and the parties waive any right to recover any such damages. In the event this arbitration agreement or a resulting arbitration award is subject to review by a court, such court shall use the arbitrary and capricious standard of review. The costs of any arbitration, including any JAMS administration fee, the arbitrator’s fee, and costs for the use of facilities during the hearings, shall be borne equally by the parties to the arbitration; provided, however, that all costs and expenses of the arbitration, including the arbitrator's fees and costs, expert fees and costs, and reasonable attorneys’ fees and costs incurred, shall be awarded to the prevailing or most prevailing Party as determined by the arbitrator. Judgment on a final award rendered by the arbitrators may be entered and enforced in a Court venue in Los Angeles County.

 

ASSIGNMENT

No right or interest in this Agreement may be assigned by Customer without the written permission of HFS, and any other attempted assignment shall be wholly void and totally ineffective for all purposes. This provision prohibits assignment of rights only; the right to delegate duties is in no way impaired by reason of this provision.

 

EFFECT OF PARTIAL INVALIDITY. If a court or an arbitrator of competent jurisdiction holds any provision of this Agreement to be illegal, unenforceable, or invalid for any reason, the validity and enforceability of the remaining provisions shall not be affected.

 

ENTIRE AGREEMENT; MODIFICATION BY SUBSEQUENT WRITING: This agreement contains the entire agreement between the parties.  No other agreement, statement, or promise, written or oral, made on or before the effective date of this agreement will be binding on the parties.  This written agreement supersedes all prior agreements. This agreement may be modified by subsequent agreement of the parties only by an instrument in writing.


Recently viewed